FlowJam S Continuous Material Flow Detection with Trend Monitoring

Microwave sensor for contactless monitoring of material flows with trend monitoring

Ask us about this item

Brand
FEATURES & BENEFITS
MAIN APPLICATIONS
TECHNICAL SPECIFICATIONS
TECHNICAL DATA
MOUNTING & INSTALLATION

Brand

Envea SWR

FEATURES & BENEFITS

Absolutely insensitive against material deposits
For any line diameter
With adapter, usable up to 220 °C and 20 bar

With ceramic mounting, usable up to 1000 °C
Detection through all non-conductive walls

Can also be supplied as compact device with integrated electronics
Detection of material clogging and material standstill

MAIN APPLICATIONS

Steel
Food
Biomass
Cement
Chemistry

Coal plant
Coating
Incineration
Minerals
Wood

Lime plant
Energy
Gypsum
Power plant
Foundry

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS
Material to detect	Dust, powders or granulates
Working principle	Microwave
Process pressure	Max. 20 bar
Process temperature	Up to +1000°C
Mounting	1 1/2 ” threat connection
Type of Conveying	All
Flow rates	No limit
Pipe diameter/detection range	Up to 1200 mm
ATEX rating	Category 3
Output	Relay, 4…20mA Trend

TECHNICAL DATA

Detects solid flows of all types for material movement
Operates with no contact, using microwaves in a process in which the material movement is detected by using the Doppler effect

If container walls, housings or pipelines are not metal, it is possible to measure from the outside

Can also be used under difficult conditions such as high operating temperatures and pressures as well as in dust ex-zone 22 with the help of a process adapter

SENSOR TECHNICAL DATA
Voltage	12 V DC powered by transmitter
Power consumption	Approx. 1.5 W
Housing	Stainless steel 1.4571
Protection system	IP 65
Using in Ex-zones	Outside pipe: Cat. 3 D Inside pipe: Cat. 3 D (only with process adapter)
Process temperature	-20… +80 °C (standard) -20… +220 °C (with process adapter) -20…+1000 °C (with ceramic flange)
Ambient temperature	-20…+60 °C
Working pressure	Max. 20 bar (with process adapter)
Detection range	0 – 2 m (dependent on application)
Required material speed for detection	Min. 0.1 m/s
Measuring frequency	K-Band 24.125 GHz; ± 100 MHz
Transmitting power	Max. 5 mW
Dimension FlowJam S	Housing: L 107 mm / Ø 52 mm Thread: L 30 mm / Ø G 1½”
Dimension FlowJam S Ex	Housing: L 147 mm / Ø 60 mm Thread: L 15 mm / Ø G 1½”
Cable gland	M16 (Ø 5-10 mm)
Weight FlowJam S	Approx. 560 g
Weight FlowJam S Ex	Approx. 850 g

TRANSMITTER TECHNICAL DATA
Power supply	24 V DC ± 10 %
Power consumption	Approx.. 3.5 W
Relay contact	Max. rated load: 250 V AC Max. peak current: 6 A Max. rated load 230 V AC: 250 VA Max. breaking capacity DC1: 3/110/220 V: 3/0.35/0.2 A Min. switching load: 500 mW (10 V/5 mA)
Analog output	1 x 4 … 20 mA (0 … 20 mA) optional: load < 500 Ω (active)
Fall-delay time	250 ms…15 s (continuously adjustable)
Weight	Approx. 172 g

TECHNICAL DATA
	Pressure adapter	Temperature adapter	Food adapter	High temperature adapter
Material	Stainless steel 1.4571, POM diaphragm	Stainless steel 1.4571, Tecapeek diaphragm	Stainless steel 1.4571, Tecapeek GF30 diaphragm/td>	Steel Ceramic diaphragm
Temperature	-20…+80 °C	Max. +220 °C	Max. +220 °C	Max. 1000 °C
Pressure	Max. 20 bar	Max. 20 bar	Max. 20 bar	Max. 40 bar
Thread	G 1½ inch on both sides	G 1½ inch on both sides	G 1½ inch on both sides	G 1½ inch on both sides
Wrench width	55 mm	55 mm	55 mm	17 mm

MOUNTING & INSTALLATION

The FlowJam S can be easily installed in the following ways:

Screwing into a 1 ½-inch-threaded connection

using a DN 40 flange as well as

using a pipe clamp or other holding bracket

Bulk Solids & Powder

Related Products

More Services

Our certified engineers and technicians can intervene from the initial consultation and planning stages, throughout the life of instruments and systems.