Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and H2O.
Heated Multi-Gas NDIR-GFC analyzer for emission compliance and analysis of wet sample gases in corrosive applications, including DeNOx (SCR / SNCR) and for the optimization of flue gas treatment processes.
- QAL 1 certified by the TÜV to EN 15267-3
- QAL3 compliance as defined by EN 14181
- Brand
- FEATURES & BENEFITS
- MAIN APPLICATIONS
- TECHNICAL SPECIFICATIONS
- TECHNICAL DATA
- APPROVALS & CERTIFICATIONS
Brand
Envea Emission
FEATURES & BENEFITS
- Temperature maintained at 180°C from the sampling point to the measurement cell for no sample loss or gas composition changes
- Can be used to measure raw & purified flue gas for desulfurization / denitrification process control
- Designed to measure wet and corrosive samples
- Perfect analyzer for ammonia slip detection
- Robust design with a stainless steel tight box enclosure to withstand industrial environments
- No nitrogen required for calibration – can use clean & dry compressed air
- QAL1 certified analyzer, offering very accurate measurements
- Acquisition / management of peripherals measurements (particulates, temperature, flow…)
- Embedded HMI with Graphic LCD display and interactive menu driven firmware, no computer required
- Remote access for all analyzer functions (visualization/ maintenance / configuration / backup…..)
- Optimized operation cost (low maintenance and low consumables requirement)
MAIN APPLICATIONS
- Ideal for process control in ammonia slip applications or NH3 leakage detection
- Process Control as DeNOx (SNCR, SCR) or other flue gas treatments
- Energy From Waste incineration (EFW) : Municipal, Hazardous, Industrial, Special, Hospital
- Biomass
- Power & Combustion
- Cement Kilns
- Pulp and Paper
- Combustion control: industrial Boilers and Furnaces in Chemical & Petrochemical Plants, etc.
TECHNICAL SPECIFICATIONS
| MEASURABLE PARAMETERS | ||||
|---|---|---|---|---|
| Pollutant | Range | |||
| HCI | 0-100 / 5000 | |||
| HF | 0-40 / 300 | |||
| NO | 0-200 / 5000 | |||
| NO2 | 0-200 / 5000 | |||
| NOx | 0-200 / 5000 | |||
| SO2 | 0-500 / 5000 | |||
| CO | 0-75 / 1000 | |||
| NH3 | 0-15 / 500 | |||
| H2O (%) | 0-30 / 40 | |||
| CO2(%) | 0-10 / 100 | |||
| O2(%) | 0-10 / 25 | |||
Lowest / Highest available ranges expressed in mg/m3 (may vary with your site conditions to be indicated on the Site Survey Form)
| TECHNICAL SPECIFICATIONS | |
|---|---|
| QAL1 to EN 15267-3 certified | YES |
| US EPA compliance | YES |
| Sampling technology | Hot/Wet Extraction |
| Sample transfert | 180°C heated sampling line |
| back flush function | YES |
| span injection | YES on analyser or at sample point |
| Built-In O2 option | YES |
| Serial link communication | RS232 / RS422 |
| Other Communication | Ethernet |
| Analogue OUTPUTS | YES (x 8) |
| Analogue INPUTS | YES (x 4) |
| Dimensions (mm) | Tight box: 710 x 560 x 300 (D x W x H) |
TECHNICAL DATA
Complete system would normally comprise of:
- Sample input
- Heated multi-reflexion optical bench
- Infrared beam
- Mirrors
- Correlation wheel
- Interferential filter wheel
- Sample output
APPROVALS & CERTIFICATIONS
Compliance with MCP Directive, BREF Incineration, LCPD and WID applications
- QAL 1 certified by the TÜV to EN 15267-3
- QAL3 compliance as defined by EN 14181
- U.S. EPA approved as compliant with 40 CFR 60 ET 75
Related Products
More From Avensys
More Services
Our certified engineers and technicians can intervene from the initial consultation and planning stages, throughout the life of instruments and systems.
Field & In House
Develop customized monitoring plans that address client's unique needs...
Start up
Start up & Commissioning is a critical phase in the life cycle of any project.
Integrated Systems
The benefits include improved performance, reduced costs, and increased reliability.
Training
We believe that product training is essential for both our employees and our clients.