FLT93F Flow Switch


The FLT93F insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ±100°F.

The FLT93F offers fast response time and is suitable for small process connections. This product is easily field-configured or factory preset, providing unparalleled flexibility, accuracy and stability for all multiple process sensing and switching requirements.

  • Brand


Fluid Components FCI


  • Ventation air flow
  • Purge gas assurance
  • Gas analyzers and sampling systems
  • Inert gas blanketing
  • Hydrocarbon gases
  • Relief valve monitoring


For Flow Service – Setpoint Range:

  • Water-based Liquids:

0.01 to 3.0 fps [0.003 to 0.9 mps]

  • Hydrocarbon-based Liquids:

0.01 to 5.0 fps [0.003 to 1.5 mps]

  • Air/Gas:

0.25 to 120 sfps [0.08 to 37 smps] at standard conditions of 70° F [21.1° C] and 14.7 psia [1.013 bar(g)].

Accuracy: (whichever reading is higher)
Liquids: ± 0.5% reading or ± 0.04 fps [± 0.012 mps]
Gases: ± 0.5% reading or ± 2 sfps [± 0.06 nmps]

For Temperature Service:

  • Accuracy: ± 2° F [±1° C]
  • Repeatability: ± 1° F [± 0.6° C]

Response Time: As low as 0.5 seconds.

Enclosure: NEMA 4X/IP66 Rated. Standard: Polyester power coated aluminum, with single 1″ NPT conduit port. Optional: Stainless steel. Optional: Dual-conduit port, aluminum with 1/2″ NPT or M20 metric conduit ports.

Compliances and Agency Approvals: FM, FMc, ATEX, IECEx, EAC/TR CU, Inmetro, EQM/ECAS. CE mark. PED, CRN.  (UKCA, UKEX pending)
Meets EC directives for EMC and LVD. Probe complies with Canadian Electrical code requirements of ANSI/ISA 12.27.01-2011 as a single seal device.

XP, Class 1, Div. 1 Groups B,C,D, T3A or T4 Ta ≤60°C
DIP, Class II/III, Div. 1, Groups E,F,G, T3A or T4 Ta ≤60°C
Nonincendive for Class I, II and III, Division 2, Groups A,B,C,D,E,F, and G, T3A or T4 -40°C ≤Ta≤60°C; hazardous (classified) locations, indoors and outdoors.
Type 4X
ATEX:   Integral:                     II 2 G  Ex db IIC T4…T2 Gb
II 2 D  Ex tb IIIC T135°C…T300°C Db
Remote enclosure
+ electronics:            II 2 G  Ex db IIC T6 Gb
II 2 D  Ex tb IIIC T85°C Db
Local enclosure
+ sensor                    II 2 G  Ex db IIC T4…T1 Gb
II 2 D  Ex tb IIIC T135°C…T345°C DbPigtail version            II 2 G  Ex db IIC T4…T3 Gb
II 2 D  Ex tb IIIC T135°C…T200°C Db
Integral:                       Ex db IIC T4…T2 Gb
Ex tb IIIC T135°C…T300°C Db
Remote enclosure
+ electronics:             Ex db IIC T6 Gb
Ex tb IIIC T85°C Db
Local enclosure
+ sensor                    Ex db IIC T4…T1 Gb
Ex tb IIIC T135°C…T345°C DbPigtail version            Ex db IIC T4…T3 Gb
Ex tb IIIC T135°C…T200°C Db

Optional N.I.S.T. Flow Calibration Services
Factory N.I.S.T. calibration in air or water is available as an option for customer specified setpoint(s) or a flow curve based on the media ranges specified above.

Flow Element

Materials of Construction: All welded 316L stainless steel for all wetted surfaces.

Process Connection: 0.75 inch male NPT

Insertion Length:

  • 1.2 inch [30 mm]
  • 2 inches [51 mm]
  • 4 inches [102 mm]
  • 6 inches  [152 mm]
  • 9 inches  [229 mm]
  • 12 inches  [305 mm]
  • 18 inches  [457 mm]

Customer specified lengths are available as an option.

Operating Temperature: 

  • Standard: -40° to +350° F [-40° to +177° C]
  • Optional: -100° to +500° F  [-73° to +260° C]

Operating Pressure: To 3500 psig [240 bar(g)]

Control Circuit

Operating Temperature: -40° to +140° F [-40° to +60° C]

Universal AC/DC supply. Input terminals and jumpers on circut board select specific power.

AC 108-132V 13W, 100mA max.
AC 207-253V* 14W, 50mA max.
AC 18-28V 7W, 230mA max.
DC 21-30V 7W, 230mA max.

* AC mains preset by factory: FM & FMc as 108-132 Vac; All others as 207-240 Vac 

Relay Contacts: Field configurable dual SPDT or single DPDT rated 6 amps at 115 Vac, 240 Vac or 24 Vdc.

Output Signal: Analog DC voltage related to flow or level/interface signal and proportional to temperature.

Electrical Connection: 1 inch female NPT 

Remote Configuration: Available as an option with customer specified interconnecting cable length.


  • ATEX
  • CE (Surface Mount Electronics)
  • FMc (Surface Mount Electronics)
  • IECEx
  • IECEx Test Report
  • Inmetro
  • UKCA/UKEX (pending)
  • SIL 2 (Surface Mount Electronics)
  • SIL 2 (Through-Hole Electronics)
  • SIL (TUV)
More From Avensys

More Services

Our certified engineers and technicians can intervene from the initial consultation and planning stages, throughout the life of instruments and systems.
Happy Professional Heavy Industry Engineer Worker Wearing Uniform, and Hard Hat in a Steel Factory. Smiling Industrial Specialist Standing in a Metal Construction Manufacture.

Field & In House

Develop customized monitoring plans that address client's unique needs...

Start up

Start up & Commissioning is a critical phase in the life cycle of any project.

Integrated Systems

The benefits include improved performance, reduced costs, and increased reliability.


We believe that product training is essential for both our employees and our clients.