The DM 170 is designed to comply with the TรV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial applications.
Due to its wide dynamic range, the DM 170 may be used in Combustion applications as well as in higher dust loading applications (such as Power, Cement and Metals smelting, and in processes without filtration). Its simplicity and wide operating range makes it also ideally suited for process optimisation applications.
- Brand
- FEATURES & BENEFITS
- MAIN APPLICATIONS
- TECHNICAL SPECIFICATIONS
- TECHNICAL DATA
- APPROVALS & CERTIFICATIONS
Brand
Envea PCME
Envea PCME Emission
FEATURES & BENEFITS
- ProScatterโขย Backscatter sensor technology with superior minimum detection as low as 1mg/mยณ compared to conventional techniques
- Manual and remote Zero and Span (Reference) checks available to ensure optimal instrument performance
- Purge Flow Fail Sensor and Optical Shield options
- Offers a more reliable PM dust measurement as an alternative to Opacity and Scintillation based monitors for emissions that are reported in mg/mยณ and provides
early indication of increased dust emissions in processes with low dust concentrations - Non-intrusive system designed to operate in noncondensing stack environments and to reduce the risk of contamination
- Contamination risks are further reduced due to singleside stack installation where critical optical components remain outside the stack
- A Flue Gas Blocker can be fitted to ensure that flue gases do not escape when the unit is opened (for auditing/maintenance purposes), thus enhancing on-site personnel safety
MAIN APPLICATIONS
- The DM 170 is well-suited for use in medium to large stacks and is suitable for low to high dust concentration measurements, regardless of dust velocity or charge.
- Typical applications include:
- Continuous Emission Monitoring (CEM) relative to Emission Limit Values (ELV) in Power Plant, Boiler and Metal Smelting applications
- Filter performance monitoring in Metal, Mineral and Chemical plants
TECHNICAL SPECIFICATIONS
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Measured parameters | Dust |
| Technology | ProScatterโขย Backscatter |
| Measurement/Monitoring capability | <1 โ 1000 mg/mยณ |
| Stack/Duct diameter suitability | 1.5 to 15 m (5- 50 ft) |
| Flue gas temperature | -20ยฐC to 250ยฐC (-4ยฐF to 482ยฐF) option: up to 400ยฐC (752ยฐF) |
| Baghouse | YES |
| Cartridge Filter | YES |
| Ceramic Filter | YES |
| Coalescent Filter | YES |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | YES |
| Wet Electrostatic Precipitator (WESP) | / |
| Wet Scrubber | / |
| Sensor variants | Stainless Steel |
| QA checks | YES |
TECHNICAL DATA
| TECHNICAL DATA | |
|---|---|
| Measurement capability | <1 โ 1000 mg/m3 |
| Sensor Variants | 316 Stainless Steel |
| Stack Temperature Ranges | -20ยฐC โ 250ยฐC up to 400ยฐC option |
| Functionality and QA Checks | Automatic zero and span |
| Data Output | RS485 (Modbus) output to Controller |
| Air Purge | option |
| Enclosure Protection Rating | IP65 |
APPROVALS & CERTIFICATIONS
Designed to comply with the TรV suitability testing scheme to EN 15267
Related Products
More From Avensys
More Services
Our certified engineers and technicians can intervene from the initial consultation and planning stages, throughout the life of instruments and systems.
Field & In House
Develop customized monitoring plans that address client's unique needs...
Start up
Start up & Commissioning is a critical phase in the life cycle of any project.
Integrated Systems
The benefits include improved performance, reduced costs, and increased reliability.
Training
We believe that product training is essential for both our employees and our clients.