The 6400TSG series utilizes our field-proven ultraviolet (UV) fluorescence technology to continuously monitor the total sulfur content found in process gas and liquid feeds. UV-Fluorescence is a non-consuming method of detection, eliminating the hassles associated with replacing tape cartridges, and enables detection as low as 10 ppb, depending on application, with stable, reproducible results.
- Brand
- FEATURES
- SPECIFICATIONS
Brand
Teledyne Analytical TAI
FEATURES
- Continuous analysis of total sulfur content, under gas-phase conditions, using the FCCM technology providing immediate, real-time TS readings for enhanced process control
- Superior flow and temperature control of liquid-phase samples via the QTCM Pyrolysis Technology ensuring high reliability and repeatability
- Excellent linearity for both gas and liquid phase conditions
- Wide range of analyzer diagnostic capabilities to continuously provide plant operators with system status conditions
- Sulfinert treated wetted parts to ensure trace levels of sulfur compounds are not absorbed into the pores of the tubing. Ensures accurate and quick response to process changes
- Wide dynamic detection capabilities from ppb up to % levels
- Easy-access, dual-door (front & rear) NEMA-4/4X system enclosure
- Multi-stream, sequencing capabilities with a single system providing reduced capital and installation costs
- Purged cabinet solutions for hazardous area installations with ambient temperature control devices designed-in for reliable field operation
- Ethernet connection allowing for remote control without having to defeat system purge
- Front panel, weather-proof N4 control switches allowing for local control without having to defeat system purge
SPECIFICATIONS
| Detection Method | UV-Fluorescence |
| Converter Method | Flame Combustion Converter Module (FCCM) |
| Analysis | Continuous |
| Compliance | Designed to meet requirements of ASTM D6667 |
| Area Classification | Class 1, Div 1/Zone 1 and Div 2/Zone 2 versions with third-party approved purge available as standard |
| Range | 0-200 ppb to percent levels total sulfur (TM) – specify at time of order |
| Repeatability | ± 2% of full scale, optionally ± 1% |
| Response Time | 90% of full scale in less than 100 seconds |
| Temperature | 41° to 104°F (5° to 40°C) |
| Noise | Less than 1% of full scale |
| Drift | 2% of full scale per week, optionally 1% |
| Supply Voltage | 110 or 220 VAC 50/60 Hz |
| Outputs | 4-20 mADC (isolated) RS-232 Ethernet (optional) |
| Flow Rate | 10 SCFH (5 LPM) standard |
| Utility Gases | Air: < 1 ppm sulfur (500 ccm nom, 40 PSIG) Hydrogen: < 1 ppm sulfur (30 ccm, 40 PSIG) Nitrogen or air for purge (optional) Zero and span calibration gases |
| Dimensions | 25″W x 72″H x 30″D (63.5 x 182.9 x 76.2 cm) |
More From Avensys
More Services
Our certified engineers and technicians can intervene from the initial consultation and planning stages, throughout the life of instruments and systems.
Field & In House
Develop customized monitoring plans that address client's unique needs...
Start up
Start up & Commissioning is a critical phase in the life cycle of any project.
Integrated Systems
The benefits include improved performance, reduced costs, and increased reliability.
Training
We believe that product training is essential for both our employees and our clients.