COD Set-Ups | Chemical Oxygen Demand | Lovibond | Lovibond

The Lovibond^® COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration.
After adding the sample to a Lovibond^® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.

• ST-COD sealed tubes ready for use
• Suppression of chloride interference up to 1000 mg/L (LR & MR) up to 10000 mg/L (HR)
• Mercury free tube tests,in absence of chloride interference
• 4 ranges:
  • Low range: 3 – 150 mg/L, meets ISO 15705:2002
  • Middle-low range: 15 – 300 mg/L, meets ISO 15705:2002
  • Middle range: 20 – 1500 mg/L, meets ISO 15705:2002
  • High range: 200 – 15000 mg/L