674 Rain Gauge

Connects directly to 6712, BLZZRD, and Avalanche Samplers, 4200 Flowmeters, and 4100 Flow Loggers

The Teledyne ISCO 674 Rain Gauge is a precision instrument that uses a tipping bucket design for accurate rainfall measurement. It has an 8 inch diameter orifice and is factory-calibrated to tip at either 0.01 inch or 0.1 mm of rainfall. With a 674 Rain Gauge connected, a Teledyne ISCO flowmeter or sampler will:

Plot graphs and print reports of rainfall data on the flowmeter’s built-in printer
Store rainfall data in internal memory for retrieval and analysis with Teledyne ISCO Flowlink® Software
Activate sampling based on rainfall

Ask us about this item

Brand
STANDARD FEATURES
MAIN APPLICATIONS
SPECIFICATION

Brand

Isco Flowmeters

STANDARD FEATURES

Three-point leveling and integral bubble level make it easy to align the rain gauge for maximum accuracy.
Sapphire jewel bearings on the tipping bucket are spring-loaded to prevent damage to the bearings and ensure consistent operation over a wide temperature range.
Screens cover all openings to prevent leaves, insects, and other debris from clogging the gauge.
Included 50-foot cable connects directly to compatible Teledyne ISCO flowmeters and samplers.

MAIN APPLICATIONS

Stormwater runoff monitoring
Inflow and infiltration studies
Combined sewer overflow monitoring
CMOM and CSO/SSO programs (Sewer overflow monitoring and prevention)
General rainfall measurement

SPECIFICATION

Rain Gauge

Type:	Tipping bucket
Compatible equipment:	Teledyne ISCO 6700, 6712, and Avalanche Samplers, 4200 Series Flowmeters, 4100 Series Flow Logger, Signature Flowmeters
Connect cable:	50 ft. (15.2 m), 2 conductor with 4-pin plug
Bearings:	Spring-loaded sapphire jewel
Orifice Diameter:	8 in. (20 cm)
Sensitivity:	English – 0.01 inch; Metric 0.1 mm
Accuracy:	English – ±1% at 2 in/hour; +3%/-4% up to 5 in/hour. Metric – ±1.5% at 5 cm/hour; +3.5%/-9% up to 13 cm/hour
Capacity:	English – 22 inches/hour; Metric – 38 cm/hour
Output Signal:	Contact closure of at least 50 millisecond duration
Switch Type:	Normally open, encapsulated reed; 10 watts, 200V DC, 0.5 A maximum
Height:	13 in. (33 cm)
Diameter:	9.5 in. (24 cm) (at mounting base)
Weight:	10 lbs. (4.5 kg)
Operating Temperature:	32° to 140°F (0° to 60°C)
Storage Temperature:	-40° to 140°F (-40° to 60°C)

More Services

Our certified engineers and technicians can intervene from the initial consultation and planning stages, throughout the life of instruments and systems.